Flight Characteristics of Quad Ducted Fan Helicopter with Thrust Vectoring Nozzles
As an unmanned aerial vehicle (UAV), a quad rotor helicopter (QRH) uses a tilted attitude to generate a horizontal thrust component in the flying direction. In the case of autonomous control, the attitude control system is used to tilt the airframe against disturbances such as crosswinds. Consequently, the flying attitude of a QRH is always inclined. In this study, thrust vectoring nozzles (TVNs) were mounted on a quad ducted fan helicopter (QDH) to maintain a horizontal attitude. The TVNs were tilted to generate thrust against disturbances without inclination of the airframe. The system was constructed using a QDH and TVNs inclined to two axes. Because the airframe is always horizontal, the system can be used for precise measurement e.g. landform and building.
M. Miwa, Y. Shigematsu, T. Yamashita, “Control of Ducted Fan Flying Object Using Thrust Vectoring,” Journal of System Design and Dynamics, Vol.6, No.3, pp.322-334, Jun. 2012.
A. Imamura, M. Miwa, J. Hino, J-H. Shim, “Extra Thruster for Quad Rotor Helicopter,” Proceedings of the 8th International Society of Intelligent Unmanned Systems (ISIUS), pp.587-591, Oct. 2012.
M. Miwa, S. Uemura, Y. Ishihara, J.-H. Shim, A. Imamura, K. Ioi, “Attitude Control of Quad Ducted-Fan Helicopter,” Proceedings of the 8th International Society of Intelligent Unmanned Systems (ISIUS), pp.280-284, Oct. 2012.
M. Miwa, S. Uemura, Y. Ishihara, A. Imamura, J.-H. Shim, K. Ioi, “Evaluation of Quad Ducted-Fan Helicopter,” International Journal of Intelligent Unmanned Systems, Vol.1, No.2, pp.187-198, 2013.
A. Imamura, S. Uemura, M. Miwa, J. Hino, “Flight Characteristic of Quad Ducted Fan Helicopter with Thrust Vectoring Nozzles,” Proceedings of the 9th International Society of Intelligent Unmanned Systems, ICIUS-2013-034, Sep. 2013.
M. Kumon, H. Cover, J. Katupitiya, “Hovering Control of Vectored Thrust Aerial Vehicles,” IEEE International Conference on Robotics and Automation, pp.1149-1154 May 2010.
W. Shuai, Qi Xiao-hui, “Aerodynamic Data Model Analysis and Simulation of Ducted Fan UAV,” 2011 International Conference on Electronics, Communications, and Control (ICECC), pp.699-702, Sep. 2011.
J. Gebauer, P. Koci, “Measurements of Features of the Ducted Fan as a Possible Actuator of a Multi-copter Vehicle,” 2011 12th International Carpathian Control Conference (ICCC), pp.127-130, May 2011.
M. Ryll, H. H. Bülthoff, P. R. Giordano, “Modeling and Control of a Quadrotor UAV with Tilting Propellers,” IEEE International Conference on Robotics and Automation, pp.4606-4613, May 2012.
A. Tayebi, S. McGilvray, “Attitude Stabilization of a VTOL Quadrotor Aircraft,” IEEE Transactions on Control Systems Technology, Vol.14, No.3, pp.562-571, May 2006.
Jonathan Fleming, Troy Jones, “Improving Control System Effectiveness for Ducted Fan VTOL UAVs Operating in Crosswinds,” 2nd AIAA "Unmanned Unlimited" Conf. and Workshop & Exhibit, 2003-6514, Sep. 2003.
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution 3.0 License.