Recent Advances in Diver Propulsion Vehicle (DPV) Ganendra RI-1: Design, Analysis, Manufacture and Performance

Hujjatul - Anam, Luqman - Haris, Putra Agung Rekayasa, Imron - Anshori, Stefanus Girindra Wardhana, Aris - Budiyarto, Wahyu - Nugroho, Agung Imam Rahmanto, Galang Choirun Amal, Agus - Budiyono, Ahmad - Hidayat

Abstract


A diver propulsion vehicle (DPV) Ganendra RI-1, also known as an underwater propulsion vehicle or underwater scooter is an item of equipment used by scuba divers and rebreather divers underwater to increase the range. DPV has done the final stages of Design, Analysis, Manufacturing and Performance Testing. The design has been completed to determine mechnical, electrical, and propulsion systems. Continued analysis of both structural analysis, and flow analysis that allows whether DPV is feasible to proceed in the next stage. Manufacturing has been done for RIB work that is by using 3-axis CNC machine. Performance of DPV has been done experiment, with thrust maximum up to 50 kgf, using 48 Volt and 80 Ah lithium-Fe battery, has been obtained maximum speed of DPV is 3.5 knots, endurance operational to 3 hours with operational depth up to 7 meters.

Keywords


Autonomous Underwater Vehicle

Full Text:

PDF

References


Kimura, S., Cox, G., Carrol, J., Pengilley, S., Harmer, A.,(2012).” Going the Distance: Use of Diver PropulsionUnits, Underwater Acoustic Navigation, and Three—Way Wireless Comunication to Survey Kelp Forest Habitats’’.In: Steller D, Lobel L, eds.Diving for Science 2012. Proceeding of the American Academy of Underwater Sciences 31st Symposium. Dauphin Island, AL. Retrieved 2014-03-28.

P. Kržič, A. Stoic, J. Kopač, “STEP-NC: A New Programming Code for the CNC Machines” Strojniški vestnik-Journal of Mechanical Engineering 55(2009)6, 406-417.

R. Rajput, A.K, Sarathe, ”Comparative Study of CNC Controllers used in CNC Milling Machine”. American Journal of Engineering Research (AJER), e-ISSN: 2320-0847 p-ISSN : 2320-0936, Volume-5, Issue-4, pp-54-62.

Pop P. Adrian, B.M. Gheorghe, “Manufacturing Process and Applications of Composite Materials”. Annals of the Oradea Univ., Fascicle of Management and Technological Engineering, Vol. IX (XIX), 2010, NR2.

L. Singh, G. Goga, M.K. Rathi, “Latest Developments in Composite Materials”. IOSR Journal of Engineering (IOSRJEN), ISSN: 2250-3021 Volume 2, Issue 8 (August 2012), PP 152-158.

U.S. Department of the Interior Bureau of Reclamation. “Diving Safe Practices Manual-Underwater Inspection Program”. 2006.

J.S. Herum, “Diving Safety Manual”. University of California, Davis Scientific Diving Program. 2010.

G. Griffiths, J. Jamieson, S. Mitchell, K. Rutherford, “Energy Storage for Long Endurance AUVs”. Southampton Oceanography Centre, UK.

C. Roman, O. Pizarro, R. Eustice, H. Singh, “A New Autonomous Underwater Vehicle for Imaging Research”. Deep Submergence Laboratory, MS# 7, Woods Hole Oceanographic Institution, Woods Hole MA 02543.

S.T. Sulistiyono, “Konsep Batas Wilayah Negara di Nusantara: Kajian Historis”. FIB Universitas Diponegoro. 2009.

M. Bellgran, “Design Wisdom of Production System Designers”. Design self understanding. The aesthetic of technology.

L.A, Gonzalez, “Design, Modelling and Control of An Autonomous Underwater Vehicle”. Mobile Robotics Laboratory, Centre for Intelligent Information Processing Systems, School of Electrical, Electronic and Computer Engineering, The University of Western Australia. 2004.

C. Detweiler, S. Sosnowski, I. Vasilescu, and D. Rus, “Saving Energy with Buoyancy and Balance Control for Underwater Robots with Dynamic Payloads”. Computer Science and Artificial Intelligence Lab, MIT, Cambridge, MA 02139, USA.

W.H. Wang, X.Q. Chen, A. Marburg, J.G. Chase, C.E. Hann, “Design of Low-Cost Unmanned Underwater Vehicle for Shallow”. Dept. of Mechanical Engineering, University of Canterbury, Private Bag 4800, Christchurch 8140 New Zealand.

B.M. Salerno, “Aluminum Structure Design and Fabrication Guide”. Ship Structure Committee. US. 2008.

T.F. Ciszek, T.H. Wang, M.R. Page, M.D. Landry, R.E. Bauer, “Silicon Materials Research on Growth Processes, Impurities, and Defects”. Presented at the National Center for Photovoltaics and Solar Program Review Meeting Denver, Colorado March 24-26, 2003.

E.T. Oppelt, “Standard Test Procedures for Evaluating Leak Detection Methods: Pipeline Leak Detection Systems”. Final Report-U.S. Environmental Protection Agency Office of Research and Development. 1990.

Ewachiw, MA., “Design of an Autonomous Underwater Vehicle (AUV) Charging System for Underway, Underwater Recharging. MIT. 2014.

Muhammad Ikhwan Bin Izhar, “Development of Autonomous Underwater Vehicle”. Faculty of Electrical Engineering, University Malaysia Pahang.2012.

“Model 1020 DC Brushless Thruster”. Tecnadyne. 2014.

Burr, A and Cheatham, J: Mechanical Design and Analysis, 2nd edition, Section 5.2. Prentice-Hall, 1995.

W.B, Morgan., W.C, Lin., 1987, Computational Fluid Dynamics, Ship Design and Model, Proceedings of the 18th International Towing Tank Conference, Lobe, Japan, 18-24 Oct. 1987, Volume 2, p. 329.


Refbacks

  • There are currently no refbacks.


Bookmark and Share


Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License.