Design and Manufacturing of UAV Backpack

Luqman Haris, Muhammad Ramadhan Kusnaedi, Jodie Ridha Arrozak, Aris Budiyarto, Agus Budiyono

Abstract


The UAV Backpack is a good concept for spying and aerial documentation device. The design of the UAV backpack is compact and modular to make it easy to be carried by one person. The material used was EPP foam laminated by fiber reinforced composite. The manufacturing process of this concept is vacuum infusion process. The ultimate tensile test of the prototype (GFRP) is 330.45 MPa. The prototype succeed to fly for 23 min at average 60 km/h with belly landing at 45 km/h and survived.

Keywords


UAV;UAV Backpack; Manufacturing; Carbon Fiber; Carbon-Kevlar

Full Text:

PDF

References


http://www.carbonbydesign.com/images/vip.png [accessed 14 July 2015]

http://www.dostkimya.com/Products/_large_infusion_diagramjpg20120307033641.jpg [accessed 14 July 2015]

Raymer, Daniel P., “Aircraft Design: A Conceptual Approach Fourth Edition”, Virginia Polytechnic Institute and State University. United State. 2006




DOI: http://dx.doi.org/10.21535%2Fjust.v3i2.669

Refbacks

  • There are currently no refbacks.


Bookmark and Share


Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License.